- General Details
The Q45S model is an odor monitoring system that uses our standard Q45 electronics package in conjunction with a special Wet H2S sensor. Measurements may be either at the inlet to scrubber systems where gas concentrations can run as high as 200 PPM or at the outlet, where gas concentrations are ideally down below 0.5 PPM. Special gas sensor configurations are available for either duct insertion or flowcell use.
Because Q45S Wet H2S Gas Detector systems are often monitoring gas streams with condensing levels of water vapor, provision has been made for eliminating water droplets from the gas sensor that could present a barrier to the diffusion of hydrogen sulfide into the sensor. An optical air-purge system controlled by the gas transmitter will periodically deliver a blast of air across the critical sensor surfaces to remove water droplets. This system insures a clear gas diffusion path to the sensor and reliable measurements on a continuous basis.
Q45S hydrogen sulfide transmitters provide a large, easy to read LCD display of H2S concentration with a second display line to indicate other status information. An alarm contact is available for external alarming functions, and a second contact may be used for alarm purposes if the air purge system is not implemented in a given application. An isolated 4-20 mA output is provided for remote data transmission, and output spans are user programmable for ranges of 0-2.000 PPM up to 0-200.0 PPM.