4060 Gas Chromatographs
Teledyne Analytical Instruments
The 4060 Series of Gas Chromatograph (GC) analyzers combine Teledyne’s field proven detector technologies with gas chromatography column separation capability. This enables reliable and repeatable of a single or multiple compounds in a stream containing interfering components.
Flame-ionization detector (FID) or thermal conductivity detector (TCD) options enable part-per-billion (ppb), part-per-million (ppm) or percent levels of detection depending on application. The analyzer includes an integral temperature-controlled sample system of 316SS and Teflon construction to provide a suitable sample to the detector. Contact TAI for other available materials.
- Field-proven microprocessor-based electronics with menu-driven functionality
- Easy-to-view 5-digit LED display for readings
- 2 x 20 vacuum fluorescent display for menu options, settings and status
- 0-1 VDC and 4-20mA (isolated) analog outputs and gas identification outputs
- RS-232 duplex digital output
- Two fully-configurable concentration alarms and one system alarm, all with Form-C relay contacts
- Built-in diagnostic capability
- Auto-calibration and remote-calibration ready (integral valves available)
| 4060/FID | 4060/TC |
| Acetaldehyde | Argon (purity and impurity levels) |
| Benzene | Carbon Dioxide |
| Butane | Carbon Monoxide |
| Carbon Dioxide – (measurement achieved with methanizer) | Helium |
| Carbon Monoxide – (measurement achieved with methanizer) | Hydrogen |
| Ethane | Hydrogen Sulfide |
| Ethyl Benzene | Krypton |
| Ethylene | Nitrogen (purity and impurity levels) |
| Hexane | Xenon |
| Methane | |
| Methanol | |
| MTBE | |
| Propane | |
| Propylene | |
| Toluene | |
| VOCs | |
| Xylene | |
- Ambient benzene, BTEX detection
- Beverage-grade carbon dioxide: detection of ppb benzene, acetaldehyde, methanol and VCM in beverage-grade carbon dioxide to ISBT specification
- Methane / non-methane hydrocarbon monitoring
- Nitrogen or Argon purity
- C1-C4 levels in natural gas or syngas production
- LNG impurity detection
- MTBE monitoring in gasoline
- Hydrogen detection in a mixed fuel gas
Chromatography Software – Tracs™
Tracs™ software developed by TAI provides all features and functionality needed to view and analyze chromatography data. When installed on a PC computer, Tracs™ collects digitized data fed from the analyzer with which it can plot chromatograms, perform analytical calculations, log data, and save information for future use.
Features include:
- Bi-directional communication of analyzer’s range, alarm and timing settings which can be remotely uploaded and downloaded
- Acquires real-time raw data for continuous display of chromatograms
- Chromatograms can be superimposed upon one another to verify repeatability
- Elution peaks can be displayed within their own respective timing frames or individually manipulated for optimal peak scrutinization
- Statistical summary including analytical calculation of measurements, distribution of values and deviations
- Data-logging
- Saving and retrieving of digitized data files
| 4060/FID | 4060/TC | |
| Sensing Technology | Flame-Ionization Detector (FID) | Thermal Conductivity Detector (TCD) |
| Gas and Ranges | Hydrocarbon compounds Trace or percent level detection (Contact factory to verify application) |
Most gases Trace or percent level detection (Contact factory to verify application) |
| Sensitivity | 1% of full-scale | 1% of full-scale |
| Accuracy | ± 2% of full-scale (at constant temperature) |
± 2% of full-scale (at constant temperature) |
| Repeatability | 1% of full-scale through all ranges | 1% of full-scale through all ranges |
| Response Time | Application Dependent | Application Dependent |
| Operating Temperature | 40-110°F (4-43°C) | 40-110°F (4-43°C) |
| Zero and Span Noise | Less than 0.5% of full-scale | Less than 0.5% of full-scale |
| Zero and Span Drift | 2% of full-scale per week | 2% of full-scale per week |
| Analog Outputs | 0-1 VDC and 4-20 mADC isolated (one output with Gas ID for 3+ gases) |
0-1 VDC and 4-20 mADC isolated (one output with Gas ID for 3+ gases) |
| Alarms | One system alarm and two concentration alarms. Form-C relays rated @ 3A 250VAC resistive |
One system alarm and two concentration alarms. Form-C relays rated @ 3A 250VAC resistive |
| Supply Voltage | 110 or 220 VAC 50/60 Hz | 110 or 220 VAC 50/60 Hz |
| Maximum Power Consumption | 600 VA | 600 VA |
| Maximum Load Impedance of 4-20 mA Output |
500 ohms | 500 ohms |
| Sample Flow Rate | 1 SCFH (0.5 LPM) standard | 1 SCFH (0.5 LPM) standard |
| Dimensions | 19” W x 8.75” H x 22.5” D (483 x 222 x 572mm) |
19” W x 8.75” H x 16.5” D (483 x 222 x 419mm) |