Xsafe Robust flammable gas detector for non-hazardous areas
General Details
XSafe features a tough alloy housing and the same standard of design and reliability as Crowcon hazardous area detectors but without the extra cost of certified electronics.
Specification
| Size | 156 x 166 x 111mm (6.1 x 6.5 x 4.3 inches) |
| Weight | 1kg (2.2lbs) |
| Enclosure material | Aluminium |
| Ingress protection | IP65 |
| Cable entries | 1 x M20, 1/2 “NPT or 3/4 NPT* on right-side |
| Terminations | 0.5 to 2.5mm2 |
| Sensor type | Catalytic bead |
| Operating temperature | mV: -40 to +80°C (-40 to 176°F) mA: -40 to +55°C (-40 to 131°F) |
| Storage | -25°C to +65°C (-13°F to +149°F) |
| Humidity | 10 to 95% RH |
| Repeatability Zero drift | <2% FSD (Typical) <2% FSD per Month (Typical) |
| Response time | T90 <15s (Typical) |
| OPerating voltage | mA: 10-30V dc mV: 2.0V dc |
| Power requirements | mA: 50mA at 24V dc 1.2W mV: 300mA (Typical) |
| Electrical output | mA: 3- wire 4-20mA (current sink or source) mV: 3- wire mV bridge Typical signal: 12-15mV/ %LEL CH4 |
| Approvals | Not certified for use in hazardous environments |
| EMC compliance | EN 50270 FCC Part 15 ICES- 003 |
*3/4 ” cable entry only available on aluminium juntion boxes.