SS500e Enhanced Moisture Analyzer
SpectraSensors SS500e Analyzer is an economical analyzer that utilizes the same state-of-the-art technology as SpectraSensors higher detection analyzers, assuring the user of high reliability and repeatability.
Rapid Response Time
At four measurements per second, the analyzer can measure the fastest changes in the pipeline. Adjustable, real-time results display every 0.25-2 seconds.
Because the analyzer’s sensor never touches the gas stream, it does not get contaminated. The factory set calibration lasts for the life of the analyzer and reconditioning is never required.
The SS500e very quickly pays for itself by doing away with expensive consumables, extra sensor heads, labor and overhead associated with excessive maintenance. Costs due to unreliable gas measurements can be reduced by eliminating added processing steps, poor gas quality and the possibility of damage to expensive equipment can result from sensors that produce incorrect data.
As with all SpectraSensors analyzers, the SS500e combines a patented laser with control electronics and “smart” software. The analyzer’s sensor heads are not subjected to corrosives or contaminants in the gas because the sensor is isolated from the sample gas stream.
State of the Art Technology
The analyzer works by shining a laser beam through the sample cell. The laser beam is selected to interact only with the measured compound, creating an absorption signal. The higher the concentration of H2O the greater absorption of light and the stronger the corresponding absorption signal. Spectrum Software analyzes these absorption peaks to produce very accurate and repeatable measurements. Since the calculation is a direct, fundamental measurement, the amount of H2O present can be measured in real-time.